2200 TPD KLINKER PLANT
GRINDING OF PETROLEUM COKE
Grinding Installation
Characteristics:
Mill type : Ball Mill
Mill diameter : 3,600 mm
Nominal length : 8,000 mm
Material to be ground : Coke
Maximum feed size : 95% < 20 mm, 5% < 30 mm.
Moisture of the coke : 8 % H2O maximum
Capacity and fineness : 20 t/h – 2.0% R/90 Microns
KILN LINE INSTALLATION: PREHEATER / KILN / COOLER
Pos K 01
1 preheater
Stage number : 5
Number of stings : 1
Preheater type : 15-15-15-13-16-AS-CC
Consisting of:
1 inlet housing inlet to the rotary kiln
In welded construction of sheet steel with profiled steel reinforcement and support, and input trough of
heat resistant cast steel.
Inlet trough cooling system with distribution pipes and the cooling fan
Fan flow : 71 m3/min
Pressure : 31.5 mbar
Motor power : 7.5 kW
Motor speed 3,000 rpm
FEED TO THE PREHEATER
Pos. H 01
1 Double rotary airlock feeder with motor 560/120 x 1,000, consisting of:
Cast-iron housing.
Cellular rotor on bearings with double seals.
Side panels with adjustable wear plates.
Gland seals.
Sprocket and chain drive with safety device to prevent overloading the drive unit, with protection and
mounting frame.
Two hollow shaft gearmotors with bevel gear box dust proof and oil proof.
Features:
Conveyed material : raw meal
Bulk density : 0.8 t/m3
Carrying capacity : 344.3 m3/h filling degree 90% and 16 rpm
RAW MILL CLINKER LINE
GRINDING OF RAW MATERIAL WITH BALL MILL
Pos E 01
1 Mill with Combiflex drive.
Characteristics:
Capacity : 195 t/h
Fineness : 12% R/90 um
Materials : Raw Materials
Maximum moisture : 1.5%
Type of mill : ball mill with two chambers
Mill diameter : 4,600 mm
Nominal length : 12,500 mm
Grinding length : 11,500 mm
Number of Chambers : 2
Length of the 1st chamber : 4,750 mm
Length of the 2nd chamber : 6,750 mm
Drive type : Combiflex
Recommended motor power : 4,000 kW
Grinding Installation
Characteristics:
Mill type : Ball Mill
Mill diameter : 3,600 mm
Nominal length : 8,000 mm
Material to be ground : Coke
Maximum feed size : 95% < 20 mm, 5% < 30 mm.
Moisture of the coke : 8 % H2O maximum
Capacity and fineness : 20 t/h – 2.0% R/90 Microns
KILN LINE INSTALLATION: PREHEATER / KILN / COOLER
Pos K 01
1 preheater
Stage number : 5
Number of stings : 1
Preheater type : 15-15-15-13-16-AS-CC
Consisting of:
1 inlet housing inlet to the rotary kiln
In welded construction of sheet steel with profiled steel reinforcement and support, and input trough of
heat resistant cast steel.
Inlet trough cooling system with distribution pipes and the cooling fan
Fan flow : 71 m3/min
Pressure : 31.5 mbar
Motor power : 7.5 kW
Motor speed 3,000 rpm
FEED TO THE PREHEATER
Pos. H 01
1 Double rotary airlock feeder with motor 560/120 x 1,000, consisting of:
Cast-iron housing.
Cellular rotor on bearings with double seals.
Side panels with adjustable wear plates.
Gland seals.
Sprocket and chain drive with safety device to prevent overloading the drive unit, with protection and
mounting frame.
Two hollow shaft gearmotors with bevel gear box dust proof and oil proof.
Features:
Conveyed material : raw meal
Bulk density : 0.8 t/m3
Carrying capacity : 344.3 m3/h filling degree 90% and 16 rpm
RAW MILL CLINKER LINE
GRINDING OF RAW MATERIAL WITH BALL MILL
Pos E 01
1 Mill with Combiflex drive.
Characteristics:
Capacity : 195 t/h
Fineness : 12% R/90 um
Materials : Raw Materials
Maximum moisture : 1.5%
Type of mill : ball mill with two chambers
Mill diameter : 4,600 mm
Nominal length : 12,500 mm
Grinding length : 11,500 mm
Number of Chambers : 2
Length of the 1st chamber : 4,750 mm
Length of the 2nd chamber : 6,750 mm
Drive type : Combiflex
Recommended motor power : 4,000 kW